Working in your pc and instantly encountering the Blue Display screen of Loss of life (BSOD) can look like a disaster. Given the truth that BSODs and cease codes are so laborious to decipher, such an issue can actually be irritating. A variety of customers have reported BSOD with an error message: BAD SYSTEM CONFIG INFO and are questioning what this is perhaps.
The Unhealthy System Config Data cease code can stop your system from booting up and will be triggered as a consequence of each software program or {hardware} issues. On this article, we’ll clarify what this error is and what are the doable causes behind it. Additionally, we’ll provide the prime strategies to efficiently repair this error and get your system up and working very quickly.
What’s the “Unhealthy System Config Data” error?
Home windows Unhealthy System Config Data error that’s often accompanied by a cease code 0x00000074 can come up as a consequence of a number of causes. This often stems from a defective system configuration which will be as a consequence of something starting from an issue with the Home windows Registry to defective drivers and corrupt system recordsdata.
What causes the “Unhealthy System Config Data” error?
There could possibly be many causes behind the Cease code: Unhealthy System Config Data error. If it is because of a {hardware} drawback, the doable causes could possibly be – reminiscence bark, unfastened wire winding, laborious disk corruption, and many others.
Then again, the software program issues that may result in this error are:
- Outdated or corrupt machine drivers
- Defective Boot Configuration Information (BCD) file
- Corrupt laborious drive
- Defective Home windows Registry
- Corrupt system recordsdata or applications.
- Corrupted RAM or MBR
- Incompatibility between replace and software program, and many others.
How you can repair “Unhealthy System Config Data” error on Home windows 10
- Restart your system
- Run SFC and CHKDSK
- Restore the Home windows Registry Through The Command Immediate
- Use System Restore to Repair the Home windows Registry
- Repair Boot Configuration Information (BCD)
- Repair with bcdedit command
- Reset Home windows
- Replace or reinstall drivers
1. Restart Your System
That is the simplest option to repair the dangerous system config error. Begin by switching your pc off after which flip it on once more. Then, test if the problem has been fastened or not. Restarting your pc can repair a number of short-term points and needs to be tried out earlier than shifting to different strategies.
2. Run SFC and CHKDSK
Corrupt file methods may trigger a Unhealthy System Config Data error that received’t go away. In such a state of affairs you’ll be able to run the Home windows System File Verify (SFC) that’s an inbuilt Home windows instrument used for checking such errors.
However, earlier than you proceed with the SFC, we advocate you to run the DISM that may test if the SFC will run correctly or not. Given beneath are the steps to do the complete process:
Step 1. Kind Command Immediate (Admin) within the Begin menu search field. As soon as the consequence comes, right-click on it and choose Run as administrator.
Step 2. Enter the next command within the Command Immediate window:
DISM /on-line /cleanup-image /restorehealthStep 3. Wait until the method is completed which might take as much as 20 minutes.
Observe: Don’t panic if the DISM cleanup appears to have gotten caught at occasions. Look forward to it to complete.
Step 4. As soon as the process is accomplished, sort in “ sfc/scannow” and hit the Enter button.
For a change, you possibly can additionally go for the CHKDSK command. This too is a Home windows system instrument however in contrast to SFC, it would scan your full drive for errors.
If you wish to use the CHKDSK command as an alternative of SFC, merely go to the command immediate once more as defined earlier. Then sort in chkdsk/r and press the Enter key.
3. Restore the Home windows Registry Through The Command Immediate
You may also get the Unhealthy System Config Data error as a consequence of some drawback with the Home windows Registry. Comply with the steps given beneath to revive Home windows Registry and resolve the dangerous config information error:
Step 1. If there’s some knowledge within the recordsdata within the RegBack folder, go for a handbook Registry restoration. First, boot into the superior start-up.
Step 2. Go to Settings, click on on Replace & Settings, after which on Restoration.
Step 3. Click on on Restart Now.
One other method of getting into the Superior Choices is:
Open the Begin Menu. Then, press and maintain the Shift key and hit the Restart button.
Step 4. After getting entered the Superior Choices part, choose Troubleshoot adopted by Superior Choices. After which, choose Command Immediate.
Step 5. Now, you should change the listing and restore it. The command immediate defaults to the deal with X:WindowsSystem32. This isn’t the true location of your Home windows set up.
Home windows installs within the C: drive by default. However, it may be put in elsewhere in case you specify another location. Do not forget that the Home windows restoration mode often boots the Home windows set up below D:.
Step 6. Kind in dir D:Win* to find the proper deal with of the Home windows. If that is the proper drive, then the command immediate will record down the listing’s contents.
Step 7. Enter the next instructions one after the other and press Enter after every command:
cd d:windowssystem32config
xcopy *.* C:RegBack
cd RegBack
dir 
Step 8. Details about the recordsdata within the RegBack listing will likely be proven now. Verify them out and if they’re from earlier than the time you began dealing with the Unhealthy System Config Data subject, proceed with the next instructions:
copy /y software program ..
copy /y system ..
copy /y sam ..Observe: The 2 durations are a part of the instructions. So, don’t exclude them.
Step 9. Now, manually reboot your pc.
You may also check out this alternate methodology to restore the Home windows Registry recordsdata:
Step 1. Insert the Home windows 10 bootable flash drive and boot into your system from it.
Step 2. Click on on Troubleshoot after which go to Superior Choices and select Command Immediate.
Step 3. Enter the next instructions within the Command Immediate window:
cd C:WindowsSystem32config
ren C:WindowsSystem32configDEFAULT DEFAULT.outdated
ren C:WindowsSystem32configSAM SAM.outdated
ren C:WindowsSystem32configSECURITY SECURITY.outdated
ren C:WindowsSystem32configSOFTWARE SOFTWARE.outdated
ren C:WindowsSystem32configSYSTEM SYSTEM.outdatedPress enter after every command to execute it.
Observe: As you execute every of the above instructions, they are going to be renamed and Home windows 10 received’t use them anymore.
Step 4. Given beneath is the second set of instructions that you should enter:
copy C:WindowsSystem32configRegBackDEFAULT C:WindowsSystem32config
copy C:WindowsSystem32configRegBackDEFAULT C:WindowsSystem32config
copy C:WindowsSystem32configRegBackSAM C:WindowsSystem32config
copy C:WindowsSystem32configRegBackSECURITY C:WindowsSystem32config
copy C:WindowsSystem32configRegBackSYSTEM C:WindowsSystem32config
copy C:WindowsSystem32configRegBackSOFTWARE C:WindowsSystem32configThis can copy the backup recordsdata of the registry and exchange all of the outdated recordsdata. As soon as achieved, shut command immediate window and restart your pc for the method to take impact.
4. Use System Restore to Repair the Home windows Registry
Step 1. Press the Home windows key + S. Kind in restore and choose the consequence that claims create a restore level.
Step 2. Then, click on on System Properties after which on System Safety. Right here, you’ll be able to test if safety is turned on. You may also configure varied settings and create a restore level too.
Step 3. To make use of a sure system restore level, click on on System Restore after which choose the restore level you should use. Comply with the directions after that.
Step 4. An awesome characteristic of the Home windows System Restore characteristic is the power to scan for affected applications. First, you should select a restore level, then you’ll be able to click on on Scan for affected applications to get an inventory of all of the applications that will likely be affected or deleted.
Step 5. Click on on Subsequent after which on End.
5. Repair Boot Configuration Information (BCD)
Step 1. Insert the bootable DVD or USB flash drive. Then, boot your PC from the inserted DVD or flash drive.
Step 2. Choose the Subsequent choice when the welcome display screen comes up after which, click on on Restore your pc.
Step 3. Click on on Troubleshoot adopted by Superior Choices. Then, click on on Command Immediate.
Step 4. Enter the next instructions one after the opposite:
bootrec /repairbcd
bootrec /osscan
bootrec /repairmbr
Don’t overlook to press the Enter button after typing in each command for it to execute.
Step 5. Shut your pc and restart the system. When you had any BCD subject, the Unhealthy System Config Data error needs to be resolved after the restart.
6. Repair With bcdedit command
Step 1. Insert the Home windows 10 bootable flash drive or DVD.
Step 2. Boot the pc from the bootable drive and click on on Subsequent.
Step 3. Select Restore your pc
Step 4. Select Troubleshoot > Superior Choices > Command Immediate
Step 5. Kind within the instructions given beneath one after the other and don’t overlook to press Enter after every of those:
bcedit/deletevalue {default} numproc
bcdedit/deletevalue {default} truncatememoryStep 6. After getting executed the above instructions, shut the Command Immediate after which, restart your system.
7. Reset Home windows
Step 1. Click on on the Home windows Begin button
Step 2. Click on on Energy choice
Step 3. Press the Shift button and whereas urgent it, click on on Restart
Step 4. Click on on Troubleshoot after which choose “Reset this PC” choice
Step 5. Click on “Take away the whole lot” adopted by “Solely the drive the place Home windows is put in.” Then click on on “Simply Take away my recordsdata.”
Step 6. Click on on Reset after which await the method to be accomplished.
8. Replace or Reinstall Drivers
Step 1. Press Home windows key + X to open the Begin menu. Select the Gadget Supervisor choice.
Step 2. Now, find the Show adapter choice and broaden it. Proper-click on the particular driver and click on on the Replace driver choice.
Step 3. Do the identical for the Disk drives.
Step 4. Within the pop-up window, click on on Search mechanically for up to date driver software program.
Step 5. Comply with alongside the display screen directions to obtain and set up the updates.
In case you have seen that the dangerous system config information error has occurred after you put in sure driver updates, then uninstall these updates and test whether or not the issue has been solved.
Conclusion
Because the actual purpose why you is perhaps dealing with the Unhealthy system config information error is tough to pin down, we will’t use any particular repair to try to resolve it. On this article, we now have tried to jot down all of the environment friendly fixes to unravel this error. We advocate you strive these out so as one after the other, and your dangerous system config information error ought to get resolved.
